Ready to Install & Fits Any Toilet

Turn any toilet into a full-featured bidet and feel fresh and clean after every use. The Wash Mate Bidet hygiene system attaches to your toilet and replaces your current toilet seat. To install, just attach the water hose from your toilet to the seat, and plug it in to a nearby power outlet. 

Essential Components are Included

INSTALLATION 2

Shut off water to toilet by closing the water feed valve. Flush the toilet to drain the toilet tank.

INSTALLATION 1

Remove the existing toilet seat and its cover from the toilet bowl. Store the removed seat and all screws in a safe place.

INSTALLATION 3

Attach the parts as indicated in the illustration.

INSTALLATION 4

Connect the T-valve to the existing pipe.

SET UP 1

Mount the bracket onto the toilet.

SET UP 2

Push the main body of the bidet onto the bracket until you hear a "click". CAUTION: Leaks may result if the bidet is not installed properly.

SET UP 3

Mount the filler onto the T-valve. Then connect the Water Feed Hose (for bidet) on to the body of the bidet.

TRIAL RUN 1

Open the water-feed valve by turning it counter-clockwise.

TRIAL RUN 2

Check to make sure that no water is leaking at and around the hose connection.

TRIAL RUN 3

With hands that are completely dry, insert the power plug into the power outlet. Check to make sure that the logo light at the top illuminates, and that the nozzle moves and retracts.

TRIAL RUN 4

Place your hand on the user sensor portion of the seat. Make sure the lights indicating water pressure gradually turn on, and that water runs the drain hole for 1-2 seconds. Your bidet is ready for use.

Want expert installation service?